engraving Empty tool path

[Anonymous]

Hi Team,

I have done a halftone image with the halftone image creator but I have an issue with the sketch. When I want to engrave some parts of the sketch come out on as an empty tool path. I have attache 2 pictures, the first one is the picture with the blue circle and that is the engrave 7 and that comes up with the warning and that is picture number 2. I also attached the fusion file for you to have a look at. The tool path number 6 which is just above comes out okay. Let me know if you need any more information.

[g-andresen]

Hi Matthias,

use the sketch for the toolpath instead of the model.

Note:
The calculation takes several minutes.

günther