editable projects wont show

[dhb9mm]

When i click on the show editable projects button, the refresh button starts going in circles, and never shows my projects. The only way i can open my files, is to go under files and click open. I have restarted the program and my computer.

[dhb9mm]

now I have reached the maximum editable documents, and I cant get in to change them. I use the personal version so I cant ask regular support.

[jhackney1972 · Accepted solution]

Take a look at this forum post and see if one of the suggested solutions help with your issue.

[dhb9mm · Accepted solution]

1. In Fusion, go to the "File" menu pull down and go to "View > Show Text Commands" to display the text command input window.  That brings up an input window at the bottom of Fusion.  (If you see "Hide" instead, you are already showing this.)
2. In that input window, look to the far bottom right side and ensure the selector is set to "Txt".
3. In the "Type Text Commands Here" field at the bottom, type:
   DataPanel.Reload