Drawing a wooden steering wheel with finger grips for Shelby Cobra

[cfrazeur52]

I am attempting to draw a wooden steering wheel for a Shelby Cobra.  The car was in a fire and the person restoring the car has asked a friend of mine to reproduce the wooden steering wheel.  I have a picture of the steering wheel for reference.  I would like to see if I could use my Shaper Origin CNC router to cut the steering wheel with finger grips. 

[TheCADWhisperer]

@cfrazeur52 

Something appears to be corrupted with the image embed.

Can you edit your original post and delete the image and try again?

Can you File>Export your *.f3d file of your attempt to model the geometry to your local drive and then Attach it here to a Reply?

[cfrazeur52]

Here is a picture of the fire damaged steering wheel. The outside diameter is 16.3 inches.

Thanks
Chris Frazeur

[TheCADWhisperer]

@cfrazeur52 

Can you File>Export your *.f3d file to your local drive and then Attach it here to a Reply?

[cfrazeur52]

Here is a picture for the wooden steering wheel for the Shelby Cobra that was in a fire, and the owner is trying to reproduce the steering wheel. I have a Shaper Origin CNC handheld router with Bench Pilot and would like to see if we could do some of the machining my router.

Thank you for the reply.

Chris Frazeur

[g-andresen]

Hi,

---

@cfrazeur52  schrieb:
Here is a picture 

---

Where?

Embed picture via

günther

[TheCADWhisperer]

---

@cfrazeur52 wrote:

I am attempting to draw...

---

 @cfrazeur52 

Can you Attach your attempt here?