Dims lines move when making any change to design

Dims lines move when making any change to design

WoodcraftMark
Contributor Contributor
233 Views
2 Replies
Message 1 of 3

Dims lines move when making any change to design

WoodcraftMark
Contributor
Contributor

Hello,

I've been having an issue since I started using Fusion.  If I put a dimension to a specific point then the design changes (even if that spot doesn't change) the dimension is placed in another point.  We make booths and I have a dimension to the top of the seat to the bottom of the booth and a dimension from the front of the seat to the back.  The top front edge of the seat is a radiused fillet.  So on paper the seat height is to the top of the curve, the depth is to the front of the curve.  When I update, it almost always switches these two points.  Every single time I update a drawing, I have to check if they moved and adjust them.  It's not losing the association, it never asks me to re-associate these.

0 Likes
234 Views
2 Replies
Replies (2)
Message 2 of 3

g-andresen
Consultant
Consultant

Hi,

please show the process in a screeencast

 

günther

Message 3 of 3

ClintBrown3D
Autodesk
Autodesk

Hi @WoodcraftMark 

 

Please can you share a bit more information, are you having this issue in the sketch environment or in the 2D drawings workspace?

 

Are you able to share a screenshot or a screencast as @g-andresen has suggested?

 


Clint Brown
Senior Product Manager - Autodesk Fusion



Book some time on my calendar
The Ultimate Guide to Drawing Automation
0 Likes