cutting two bodies

[baloshUSCM9]

Hi. I am trying to build a bowl by cutting two bodies, each with a different color. But the result is a bowl with one color. I intend to get a two-color bowl. What am I doing wrong?

Thanks

[g-andresen · Accepted solution]

Hi,

Please share the file for reply.

File > export > save as f3d on local drive  > attach to post

günther

[baloshUSCM9 · Accepted solution]

Thank you.

If I cut, the 2 colors stay, but with swivel command, only one color stay.

[TheCADWhisperer]

@baloshUSCM9 

Can you File>Export your *.f3d file to your local drive and then Attach it here to a Reply?

[baloshUSCM9]

Thank you



If I cut the colors stay.

In a swivel command, the colors disappear.

[g-andresen]

Hi,

If you share the file there would be a chance to analyze the situation and give hints to possible solutions.

günther

[TheCADWhisperer]

@baloshUSCM9 

No file Attached?

Split Face.

Appearances (by Face).

[baloshUSCM9]

Here is the file

[g-andresen]

Hi,

create 1 revolve body, split the faces and give them different appearances

günther

[baloshUSCM9]

Thank you. I understand.

But it doesn't resolve my problem.

My goal is to CNC wood in shapes to get a nice colors appearance from 2 or
more wood layers from different colors.

I want to CNC shapes on the wood layers and the glue them and then CNC
again.

Shapes like that for example







If I cut, it is working well, but swivel is "deleting" the colors.



Can I maintain the colors with swivel command?

Thank you very much for your time



With best regards

Yeshayaou Balosh

[g-andresen]

Hi,

---

@baloshUSCM9 wrote:

Shapes like that for example

---

Missing!

Might help

[baloshUSCM9 · Accepted solution]

Thank you.

It is good to know that it is possible.

But for an unknown reason for me, I see only one color, with my Fusion with your file.

I can't figure it out, why it is so? please look here down.

Thank you very much

[JoshuaOrr · Accepted solution]

Try this:

This is a tool used to quickly make objects more visible when working on a document; I imagine it was likely turned on because the wood textures were difficult to see sketch objects and surface bodies through.

[baloshUSCM9 · Accepted solution]

Thank you for your help.

Your file is working fine.

Mine isn't.

When I am trying to divide it, I got an error massage.

First, why do I got the upper ted body?



And here is the error massage



Can you please cutting my two bodies, in my file so I can undertand w=hat am
I doing wrong?



Thank you very much



With best regards

Yeshayaou Balosh

[TheCADWhisperer · Accepted solution]

---

@baloshUSCM9 wrote:

Your file is working fine.

Mine isn't.

When I am trying to divide it, I got an error massage.

Can you please cutting my two bodies, in my file so I can understand what am
I doing wrong?

---

@baloshUSCM9 

Did you mark this issue as solved?

Is it really solved?

First thing I notice is that there are no dimensions in your Sketch1?

[baloshUSCM9]

Hi



That was only a test case in order to see what can be done.

Now, thanks to your help, I know what to do.

I will draw more complex shapes in order to find a nice CNC body.



With best regards

Yeshayaou Balosh