Creating drawing from design

[steve67]

getting a half white portrait background when creating a drawing from design - rest of the screen in landscape is grey

Can't see an obvious fix - what I am missing please ?

[jhackney1972]

This is probably a graphic issue.  Check your graphic card using the Graphics Diagnostic routine especially checking the graphic card drivers at the bottom.  You also could switch to a different Graphic Driver in the Fusion 360 Preferences.

[steve67]

Hi - no changes have been made to the graphics board which was working fine
3 hours ago - here are details from Fusion on the installed board;



[GPU Information]

GPU Device: Intel(R) UHD Graphics 630

GPU RAM: 128 MB (Integrated card)

GPU Driver API: DirectX 11.0

GPU Driver Version: 30.0.101.3111

GPU Driver Date: 09/14/2022



[Graphics Effects Settings]

Anti Aliasing: Off

Ambient Occlusion: Off

Object Shadow: Off

Ground Shadow: Off

Ground Reflection: Off

Selection Display Style: Simple

Transparency Effect: Better Performance



[Limit effects to optimize performance]

On

[TheCADWhisperer]

@steve67 

What size is your sheet?

Is it landscape or portrait?

What size is your boarder?

[jhackney1972]

You have nothing to lose, try changing the Fusion 360 Graphics Driver just to see.

[TheCADWhisperer]

---

@steve67 wrote:
Hi - no changes have been made to the graphics board which was working fine
3 hours ago - 


GPU Device: Intel(R) UHD Graphics 630

GPU RAM: 128 MB (Integrated card)

---

I have not heard good things on Intel Integrated Graphics.

[steve67]

Hi - sheets are all set up as A3 Landscape - presumably the border settings
are defaults

[steve67]

Hi - just tried all 3 optional drives in Fusion with the same result - also
tried creating a new template - but no joy ! Checked driver graphics
updates and the last update was 9.6.22 - it was reinstalled 7.11.22 after a
re-config - so nothing recent

[ClintBrown3D]

Hi @steve67 

I would suggest that you first try to clear your cache.

If this does not work, I would suggest resetting Fusion, using Fusion Service utility the https://www.autodesk.com/support/technical/article/caas/sfdcarticles/sfdcarticles/How-to-launch-the-... 

[steve67]

Hi - thanks for the feedback - tried a few things this morning with Autocad
but resolved to remove and re-install the program which cleared it. Looks
like the problem was caused from a sync error with a pdf writer.

[ClintBrown3D]

Hi @steve67 

Glad you are up and running again.