Circle gets out of sketch plane

[jsroques_web]

Hello,

I experience a strange behavior using center point circles in sketch : whenever I change diameter, circle is getting out of the sketch plane. Let me illustrate that :

Before : 

Before

After changing diameter

After change diameter

After changing diameter - Side view

After change diameter - Side view

I never realized a sketch object could be outside of the sketch plane...

Circles are tangent to a contruction line... so they can rotate (and are rotating in my case...) around the line.

How could I force the circle to stay in the plane ?

Thanks in anticipation for your help.

Jean-Sébastien

[MoshiurRashid]

Hi

Thanks for posting. Please attach the file here. (File> Export> f3d) with the faulty orientation of the circles

[gery.springer]

Have you 3d sketch activated? (sketchbox on the right, bottom icon)

[MoshiurRashid · Accepted solution]

@jsroques_web 

Uncheck this and try changing dimensions. Does they deform?

[jsroques_web]

Ah, yes, it was... I also had a projected line outside the main sketch map.

I removed the offeding line and deactivated 3D Sketch.

Now circles are staying within plane.

Thanks a lot for the quick answer.

Jean-Sebastien

[jsroques_web]

Hello,

Deactivating was not sufficient as I had an unwanted projected line I added by mistake. But removing is and deactivating 3D Sketch make it behave as I expected.

Thanks.

Jean-Sébastien.

[MoshiurRashid]

@jsroques_web 

Yes. I knew you can do the rest of the work. 🙂

Feel free to share any confusion, questions in the forum. We are here for that.

Stay safe

God bless.