Camera orientantion problem while sketching

[mateusz.goralczyk]

Hi,

I have a problem with camera orientation while sketching. When I want to modify existing sketch or make a new one it turns up with camera facing from the top but it rotated 180 degree every time - up is down. I use Fusion 360 for few years now and it newer happened before. I don't know how to fix that. I've tried searching some options in preferances and reinstalling. It didn't help. Do you know how to fix that? It is vey disorienting and iritating when you need to change it all day...

Thanks

[TrippyLighting]

Can you share the design and perhaps also create a screencast of. Behavior?

[mateusz.goralczyk]

Here is screencast that shows the problem:

https://autode.sk/3RYVCzE

[mateusz.goralczyk]

Here it is: 

https://autode.sk/3RYVCzE

[davebYYPCU]

There is another thread on this topic Two problems after update....

where @jhackney1972 is happy so far.

Plain weirdness - outright destructive to CNC machines, and should be addressed.

@jeff_strater you got a few minutes?

[jhackney1972]

Dave, I was mentioning, to the original poster, that I liked the feature that takes the model to the sketch plane and then returns it to the original orientation and I use it all the time.  He wanted to turn it off.  I did not say I am "happy" with the current extra "spinning" of the model that is occurring with the latest update.

[mac_ito]

hi, I have the same behavior problem, and it is not new, on a daily basis this behavior is extremely irritating and painful

https://forums.autodesk.com/t5/fusion-360-support/orientation-view/m-p/11423118