CAM Contour selection display problem.

[Przemek_Potyra]

Hello.

What happened to blue contour line ? After last update it is very jagged while selecting contours in any CAM operation. 30mm dia circle on the first screenshot, and some fillets on the other.er one.

[HughesTooling]

I'm not seeing this problem. Are your bodies a long way from the document origin? If you use the measure tool and select the edge what does it give for the centre X,Y and Z.

Mark

[Przemek_Potyra]

Both bang on the origin. Does not matter the size or position. It "skips" fillets and makes circles jagged. Only blue contour selection line is bad. Actual toolpath and simulation are ok and true to selected "real" body contours.

[paul.clauss]

Hi @Przemek_Potyra  and @HughesTooling 

Thanks for posting! I am able to recreate this issue with the model on both my Mac and PC and am certain both are on the most recent graphics drivers available. 

I'm curious why you are not seeing this problem, @HughesTooling - I tested a variety of graphics settings and was unable to get the selected contours to appear smoothly. What OS are you currently working on? Are you using a high-resolution display?

Because my systems are fully up to date and I was unable to smooth out the contours, I have logged CAM-14291 on this issue for further investigation.

[Przemek_Potyra]

Actually couple guys reported same issue on F360 facebook group. After more testing I noticed that it also has some problems with toolpath itself. 2mm radius fillet here, 0.01mm tolerance and toolpath looks very jagged too.

[paul.clauss]

Hi @Przemek_Potyra 

Thanks - would you mind adding a link to the Facebook post on this thread? Or a screenshot if it is a private group? I'd like to get an idea of how many folks are being effected by this issue.

Also, feel free to link to this thread on Facebook!

[Przemek_Potyra]

Sure. https://www.facebook.com/groups/fusion360users/2717382464958535/?comment_id=2717675498262565&notif_i...

"Couple guys" is 3 people now but I believe it is more wide-spread bug.

You can spot it on simulation comparison too.

[HughesTooling]

---

@paul.clauss wrote:

Hi @Przemek_Potyra  and @HughesTooling 

Thanks for posting! I am able to recreate this issue with the model on both my Mac and PC and am certain both are on the most recent graphics drivers available. 

I'm curious why you are not seeing this problem, @HughesTooling - I tested a variety of graphics settings and was unable to get the selected contours to appear smoothly. What OS are you currently working on? Are you using a high-resolution display?

---

Ok I do see it if I zoom in, guess the scale of the parts I'm working on don't show it that bad. The Zoom bug might be why I missed it as well. Not seeing any problem with toolpath though.

Mark