Body splitting Error

[kadeevans53]

Hi everyone, for the last few days I have been learning to model a Boeing 737 and have done the main parts of it. Currently i am adding detail to it, and that's where I am having a problem as when I try to use the split body command it comes up with the Error - The operation could not be completed avoid self-intersecting inputs and try again. After trying to find a way around this and solving it I could not, so if anyone knows what to do please let me know.

[TheCADWhisperer]

@kadeevans53 

Can you File>Export your *.f3d file to your local drive and then Attach it here to a Reply?

[kadeevans53]

@TheCADWhisperer  Here is the file

[TheCADWhisperer · Accepted solution]

@kadeevans53 

You have an unresolved issued highlighted on the Timeline with Mirror 1.

You have two teeny tiny extra lines in this sketch.  Remove them, constrain the endpoints and Split Face then works.

There is an issue with the sketch on the other side that I will let you find.

You can avoid these issues by fully defining your sketches.

If you can't find the issues - let me know and I will make a video.

[kadeevans53]

Thanks for the help, i got it to work now.