Hi,
There is a problem with the code in the Linux CNC turning postprocessor when drilling. The machine makes unnecessary movements. (Moves back and forth at rapid traverse (see G-code)).
Actually, drilling should be done with the drilling cycle (G81 / G83 (peck drilling)).
Would it be possible to fix the problem and/or implement the drilling cycle?
Thank you.
(BOHREN_mit_Eilgangsausfahrt)
N76 M5
N77 M1
N78 T1 M6
N80 G90 G94 G18
N81 G54
N82 M8
N83 G97 S3183 M3
N84 G0 X0. Z10.
N85 G0 Z5.
N86 Z10. (unnecessary)
N87 Z5. (unnecessary)
N88 Z4.319 (unnecessary, but maybe ok)
N89 G1 Z-44.95 F190
N90 G0 Z5.
N91 Z10.
N92 M9
N93 G53 G0 X240.
N94 G53 G0 Z0.
