Can we get a post processor written for the CNC Masters MX 4 axis control? It's a relatively short list of G and M code but also has probing capabilities. Here is the list. The Master Software supports these standard Milling Machine G-Codes and M-codes: G00 = Position (Fast speed) G01 = Linear interpolation (Feed speed) G02 = Circular interpolation (CW) G03 = Circular Counter-clockwise interpolation (CCW) Format: X__Y__I__J__ I,J are relative distance from start to center. Incremental Z can be added for helical designs. G40 = Cancels G41 and/or G42 G41 = Tool Radius compensation left G42 = Tool Radius compensation right G54 = Work Offset in Absolute Mode G55 = Work Offset G56 = Work Offset G57 = Work Offset G58 = Work Offset G59 = Work Offset G70 = Input in inches G71 = Input in millimeters G73 = High-Speed Peck Drilling Cycle G81 = Drilling Cycle G82 = Counter Boring Cycle G80 = Cancel Cycle G83 = Deep Hole Peck Drilling Cycle G90 = Absolute move (Modal) G91 = Relative/Incremental move (Modal) M00 = Pause M03 = Spindle on M04 = Spindle on reverse M05 = Spindle off M08 = Coolant on M09 = Coolant off M30 = End program This control has 4 axis and is capable of running all simultaneously X,Y,Z, and W W is a simple rotary table that can be set up in A,B, and C positions Thanks, Dave
Show More