Community
Fusion Manufacture
Talk shop with the Fusion (formerly Fusion 360) Manufacture Community. Share tool strategies, tips, get advice and solve problems together with the best minds in the industry.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

View gcode during F360 simulation?

5 REPLIES 5
Reply
Message 1 of 6
fritter63
1131 Views, 5 Replies

View gcode during F360 simulation?

Subject says it all. Is it possible to view the gcode that is being executed during simulation?

5 REPLIES 5
Message 2 of 6

Nope,

The post processing to the g-code really happens after everything.

You can backplot the g-code in something like CIMCO editor however.

Laurens Wijnschenk
3DTechDraw

AutoDesk CAM user & Post editor.
René for Legend.


Message 3 of 6
HughesTooling
in reply to: fritter63

If you need a free backploter try this nc-corrector

 

Mark

Mark Hughes
Owner, Hughes Tooling
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.

EESignature


Message 4 of 6
scottmoyse
in reply to: HughesTooling

Or you can buy G-Code Edit from cnccookbook.com. Works on a Mac as well.


Scott Moyse
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.


EESignature


Design & Manufacturing Technical Services Manager at Cadpro New Zealand

Co-founder of the Grumpy Sloth full aluminium billet mechanical keyboard project

Message 5 of 6
Irisusa-LOM
in reply to: fritter63

So that's a NO?

Message 6 of 6
seth.madore
in reply to: fritter63

No, it is not possible at this point to view the g-code while Simulation is occurring.


Seth Madore
Customer Advocacy Manager - Manufacturing

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report