Turning - Rest from Stock - Unexpected Display

[Christoph_360]

Hello

If the Configuration "Small without Slot" is selected, "Rest from stock" is displayed correctly.

But when I switch to the Configuration "Small" ( with Slots), the display "Rest from Stock" is not correct.

In the Machine Simulation, the "Rest from Stock" is displayed correctly again.

Thanks

Christoph

[seth.madore]

I can't say that I'm that surprised that there are issues, as Configurations are not yet well supported in the MFG workspace.

Could you tell me a bit about your workflow? I'm curious why you have duplicate models and are referencing Stock From Solid instead of "From Preceding Op > Continue Rest Machining"

Also, in the Design space, it appears that there may be something off with your Config: setting it to "Small without Slot" gives me this result:

But "Large" does produce this:

 

 

[seth.madore · Accepted solution]

I've logged this as CAM-56443, thanks for raising the issue!

[Christoph_360]

Hello

---

@seth.madore  wrote:

I can't say that I'm that surprised that there are issues, as Configurations are not yet well supported in the MFG workspace.

---

Thank you for the support and the interesting questions, I will try to answer one question after the other with my level of knowledge.

I have only achieved excellent results with Configurations in the MfG workspace so far. On the contrary, I was amazed that the Configurations in the MfG workspace worked so excellently from the beginning. I like to give a big compliment to the development team.

Of course, what you should never use when using Configurations in the MfG workspace is the Manufacturing model.

Thanks

Christoph

[Christoph_360]

Hello

---

@seth.madore  wrote:

Could you tell me a bit about your workflow? I'm curious why you have duplicate models and are referencing Stock From Solid instead of "From Preceding Op > Continue Rest Machining"

In this example, I'm working with a Configured Design "Stages of Design for Manufacturing". Therefore, I can insert the current raw and finished part of the current setup from the configured design for each setup and don't need a blank "From Preceding Op"

If I have a mill/turn machine, I need a raw and finished part for the primary spindle and a raw and finished part for the secondary spindle to run a realistic simulation. Of course, Fusion still lacks a Mill/Turn machine model, but I assume that this will come.

Thanks

Christoph

[Christoph_360]

Hello

---

@seth.madore  wrote:

Also, in the Design space, it appears that there may be something off with your Config: setting it to "Small without Slot" gives me this result:

But "Large" does produce this:

---

Thank you for the support

I created the configuration "Small without Slot" only to make the unexpected behavior more visible, as it seems to be caused by the slots.

---

@seth.madore  wrote:

Could you tell me a bit about your workflow? I'm curious why you have duplicate models and are referencing Stock From Solid instead of "From Preceding Op > Continue Rest Machining"

---

Using the "Stages of Design for Manufacturing" workflow in a Configured Design is of course very special, but Fusion offers me the possibilities to apply this workflow.

Thanks

Christoph

[Christoph_360]

Hello

In the January 2025 Update and Community Bug Fixes (MFG) it says that this bug has been fixed.

Unfortunately, however, it is still buggy.

Thanks

Christoph

[seth.madore · Accepted solution]

Yep, you're absolutely right, my apologies. It looks like we split the ticket into two issues, fixed one of them and not the other. The other ticket to track this is CAM-58801 and I've added this thread to the ticket.

[Christoph_360]

Hello

---

@seth.madore wrote:

Yep, you're absolutely right, my apologies. It looks like we split the ticket into two issues, fixed one of them and not the other. The other ticket to track this is CAM-58801 and I've added this thread to the ticket.

---

Many thanks to the Fusion team for resolving this issue, it appears to be functioning perfectly.

Thanks

Christoph

[seth.madore]

🎉🎉