Troubles with Facegroove

[Anonymous]

Hey guys new to fusion 360 and the forum.  I am attaching a part that im having issues facegrooving the relief/undercut between the 2 diameters.  This is the first facegrooving toolpath i've had to do on fusion. Any help would be greatly appreciated

https://a360.co/39fXMWx

[seth.madore]

Which groove are you trying to do; the one on the face or the one that's inside the groove on the OD?

[Anonymous]

inside the groove.  The left and the right side. Once i can get one groove figured out i will add the same tool opposite hand and do the other side

[seth.madore]

Not going to lie, I'm struggling getting this to work. I know for certain that the current algorithm does not work well with face grooving between two faces, as is the case here. Typically, the solution can be to create a Sketch and use that, but that too is giving me issues.

I do know that if I delete the opposite side, I'm able to get a toolpath:

 

But I realize that doesn't help us out any....

[Anonymous]

i was able to do the other grooves also. Its driving me crazy haha.  We really need to get these parts running on the shop floor or else id move on and get back to it at another time.  I have even lied to the software and tried to make it a profiling tool and program it as a profile and it still will not recognize the stock in there.  I am at a standstill currently.