Community
Fusion Manufacture
Talk shop with the Fusion (formerly Fusion 360) Manufacture Community. Share tool strategies, tips, get advice and solve problems together with the best minds in the industry.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Toolpath simulation adds extra stock?

4 REPLIES 4
SOLVED
Reply
Message 1 of 5
FrodoLoggins
170 Views, 4 Replies

Toolpath simulation adds extra stock?

Here's how my stock is programmed; stock is same size as model:

Screenshot 2023-06-22 at 2.47.23 PM.png

 

Here's how the stock appears in the simulation:

Screenshot 2023-06-22 at 2.47.45 PM.png

 

This causes false positive crashes detected. 

 

 

 

 

- Time Magazine’s Person of the Year 2006
- Apple M1 Max rMBP A2485 // Latest MacOS // Latest Fusion
- Usually working off files uploaded to Fusion as: Step, STL, SLDPRT. If it matters ask me.
4 REPLIES 4
Message 2 of 5
seth.madore
in reply to: FrodoLoggins

This isn't a new issue, and one I think you've raised before (granted, over a year ago). This occurs when stock is set to "No additional Stock".

sethmadore_0-1687465018963.png

 

Set it to "Add Stock To Sides and Top" and set the value to zero.

 

It does appear though that the situation has gotten worse. If memory serves me, it was only adding to the top surface in times past.

I'll investigate this and get it logged.

 


Seth Madore
Customer Advocacy Manager - Manufacturing
Message 3 of 5
seth.madore
in reply to: FrodoLoggins

I've logged this as CAM-46244


Seth Madore
Customer Advocacy Manager - Manufacturing
Message 4 of 5
brekmiller
in reply to: seth.madore

Message 5 of 5
seth.madore
in reply to: brekmiller

Thanks Brek, I didn't find those when I searched 🤔


Seth Madore
Customer Advocacy Manager - Manufacturing

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report