Community
Fusion Manufacture
Talk shop with the Fusion (formerly Fusion 360) Manufacture Community. Share tool strategies, tips, get advice and solve problems together with the best minds in the industry.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Toolpath picked up bend lines and destroyed job

2 REPLIES 2
Reply
Message 1 of 3
rhetths
114 Views, 2 Replies

Toolpath picked up bend lines and destroyed job

The new software update downgrade can mean the silhouette toolpath selection option with outside loops selected can pick up bend lines and thus cut the bend lines and wreck the job.  When i originally wrote the toolpath the bend lines were not shown as being toolpathed, i found out when my machine cut them, and now the toolpathing shows the bend lines as being a toolpath, even though outside loops only is selected.

2 REPLIES 2
Message 2 of 3
seth.madore
in reply to: rhetths

Would you be able to share your Fusion file here?
File > Export > Save to local folder, return to thread and attach the .f3d/.f3z file in your reply.


Seth Madore
Customer Advocacy Manager - Manufacturing
Message 3 of 3
seth.madore
in reply to: rhetths

A quick test with a VERY basic part yields this:

2023-12-27_15h14_39.png


Seth Madore
Customer Advocacy Manager - Manufacturing

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report