Announcements
Attention for Customers without Multi-Factor Authentication or Single Sign-On - OTP Verification rolls out April 2025. Read all about it here.

Tool Offsets

alan
Advocate

Tool Offsets

alan
Advocate
Advocate

Hello,

 

I am milling a pocket that is a lot like a slot.  In the past I have been able to adjust the tool offset diameter at the machine to increase the width of the pocket.  This particular post when I change the diameter offset on the machine nothing changes.  I even made the error of not pre setting the offset to the diameter of the end mill being used.  Normally that would have resulted in an oversize or undersize pocket.

 

What am I missing?

 

Thanks

0 Likes
Reply
Accepted solutions (1)
1,232 Views
4 Replies
Replies (4)

GeorgeRoberts
Autodesk
Autodesk

Hello,

 

Thanks for posting. Are you able to share the model you are using? I would assume this is an issue with the compensation type that is selected

 

Cheers

-

George Roberts

Manufacturing Product manager
If you'd like to provide feedback and discuss how you would like things to be in the future, Email Me and we can arrange a virtual meeting!
0 Likes

alan
Advocate
Advocate

Thank you, yes I can share the model but I don't know how.  Please explain.

0 Likes

GeorgeRoberts
Autodesk
Autodesk

thanks for the reply. The easiest way is to export the file as a Fusion 360 archive file. To do this, choose the export option from the Fusion file menu as shown below:

image.png

 

Once the export is complete, simply add it as an attachment to your reply :slightly_smiling_face:

 

Cheers

-

George Roberts

Manufacturing Product manager
If you'd like to provide feedback and discuss how you would like things to be in the future, Email Me and we can arrange a virtual meeting!
0 Likes

alan
Advocate
Advocate
Accepted solution

Thank you for the help.  The mention of the compensation type was enough and I figured it out.

0 Likes