regarding Cam

[Anonymous]

how can we define and select the new stack point in fusion. Generally we need to take default generated stack points.

[Anonymous]

right click on the setup that you want to change > edit > in the setup tab verify the orientation is the way that you want your part oriented, if it is not select the Z axis and X axis > then click on the ORIGIN and select what you want Model Origin / Selected Point / Stock box point / Model box point > then click on the next button down which is dependent the origin selected, all the points that you can choose from should pop up and then you can make your change.

[matthew.nichols]

you can select the pulldown when in the job setup; in this pulldown you have options of how you want to select the origin point.

and then based on your selection in the pulldown defines how you can define or select the origin point.

for example; in the image below i have stock box point selected and then i can select a point on the stock boundary.

the next image below shows all the points that can be selected around the stock by the white dots.

[Steinwerks]

For yet another response, Curt Chan does a pretty good video for some animated examples (stock point setup starts at about 1:35):