Community
Fusion Manufacture
Talk shop with the Fusion (formerly Fusion 360) Manufacture Community. Share tool strategies, tips, get advice and solve problems together with the best minds in the industry.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

POST

1 REPLY 1
Reply
Message 1 of 2
CreativeComposites123
100 Views, 1 Reply

POST

Anyone know how to edit the post below to get the generic start and end code in as opposed to the one fusion posts out ? the post is standard 840d siemens 

image (1).pngimage.png

1 REPLY 1
Message 2 of 2

@CreativeComposites123 

You will need a custom post written for this machine if the generic post is not providing the correct output for your machine. There are professionals who can develop the post and confifgure it to suit your needs! 

 

CNC_Lee_0-1691676063923.png

 

 

If my post answers your question, please use Accept as Solution.

CNC Lee
Fusion 360 CAM Post Processor Expert
https://linktr.ee/cnclee

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report