Post Processor Imes Icore COMPAC 350 PRO+

[robin.israel]

Any advice where to get a Fusion360 post processor for the (5-axis) Imes Icore COMPAC 350 PRO+?

[engineguy]

@robin.israel 

If your machine layout is X,Y,Z,B,C then try the attached Post Processor, if it is A,B/ B,A/A,C/C,A it can easily be changed, it is a pretty good 5 Axis Generic PP that outputs ISO G code, don`t know what your Control uses so all I can say is Post out some code and see if the control accepts it, should tell you in the Operators Manual and show samples of code.

[robin.israel]

It is a Logosol 5-Axis Controller, but I do not have the machine in my shop yet.

[engineguy]

@robin.israel 

Looking at the control on their website it should handle the code from the PP I uploaded for you.

However, I suggest that you do a small sample program with say a Contour, a Pocket and a Drill operation in it in Fusion, generate the code and send the code to the Machine Maker/Reseller where you are buying the machine from and ask them if the code you have sent them is OK on their Machine/Control, they will know for sure if it will be OK !!

Best I can offer, maybe someone else has more on this, maybe a user of this Machine/Control perhaps???

[infoM3BTD]

Hi! I'm also interested into buying the Imes Icore Compact 350 Pro or the dental counterpart Imes Icore Coritec 350 Pro. 

Have you been successfully working with the machine together with Fusion 360?

Did the post from second answer work for you and your machine?

Anyone else working with these machines and Fusion?

Many greetings

Clemens

[robin.israel]

No, this is not the right postprocessor. In the mean time i got an example programm from Imes Icore which shows a significantly different code.

[engineguy]

@robin.israel 

Then please upload the sample code so that someone can compare with outputs from other PPs.

[robin.israel]

Beware: Original filetype is a .iso

I changed it to .nc, because iso file upload is not supported in this forum.

The file is attached.