Post Processor for CNC Factory Python

[tobyRVD5D]

Hello! We are trying to get our hands on the correct post processor for our machine. It is a Python XPR from CNC Factory. Any help is appreciated.

[engineguy]

@tobyRVD5D 

If it has the Syntec control try the attached Post Processor, it is a "Generic" one for Syntec controls.

[tobyRVD5D]

Thank you! 

[jeremyFQS9J]

Hello 

I have a cnc factory python as well. did you have any luck with the Syntec processor? 

[engineguy]

@jeremyFQS9J 

Did you download the PP from my earlier post ? Give it a try 🙂

[jeremyFQS9J]

Yes, I did. 

I can't seem to get moving correctly. I've attached the PP that was made for Vcarve.

[engineguy]

@jeremyFQS9J 

If you go to the MDI Screen (Manual Data Input) on your control what do you type in to make an Axis move ??

A typical command might be something like :-

G1G91X100F200

That command would move the X Axis incrementally by the  X amount input, if you are using Inches then do something like :-

G1G91X8F10

If these work then the control is in ISO mode and should accept G Code from a Fusion Syntec Post Processor.

If you have any code that is known to move the machine then please provide a sample 🙂

[tobyRVD5D]

I'm not sure yet. I typically run Cabinet Vision on our machine. One of the lead fabricators wants to Run Fusion for more complex furniture parts. I think he is still working on it.