Community
Fusion Manufacture
Talk shop with the Fusion (formerly Fusion 360) Manufacture Community. Share tool strategies, tips, get advice and solve problems together with the best minds in the industry.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Post process Z-Mat VMC 850

6 REPLIES 6
Reply
Message 1 of 7
conny_olsson
142 Views, 6 Replies

Post process Z-Mat VMC 850

 

I an looking for a post process for our CNC milling machine Z-Mat VMC 850 with Fanuc 0i MF plus.

Does anyone have on or can help me get a post processor that works for this CNC mill.

Kind regards Conny

6 REPLIES 6
Message 2 of 7
a.laasW8M6T
in reply to: conny_olsson

Have you tried the standard Fanuc Post?

alaasW8M6T_0-1700032330867.png

 

It should work fine as that machine appears to be a basic 3 axis mill.

Message 3 of 7
conny_olsson
in reply to: conny_olsson

 

Thank for the reply. We will test if it works.

We will son have 4 axis on our mashine. We are also looking at equipping our CNC milling machine with a 5 axis. So I´d rather get hold of a post processor that can handle 5 axes 

Message 4 of 7
a.laasW8M6T
in reply to: conny_olsson

Hi

That post processor is already set up for 4/5axis.

You just need to apply a machine configuration

https://help.autodesk.com/view/fusion360/ENU/?guid=MFG-MACHINES 

 

You can also setup machine simulation as well.

https://help.autodesk.com/view/fusion360/ENU/?guid=MFG-MACHINE-BUILDER-OVERVIEW 

Message 5 of 7
conny_olsson
in reply to: conny_olsson

Thank for the reply. We will test if it works.👍

Message 6 of 7
CNC_Lee
in reply to: conny_olsson

@conny_olsson 


If the generic posts are not providing the required output for your machine. I offer post processor development services and happy to work out a solution for your machine! Message me if still needing assistance. 

If my post answers your question, please use Accept as Solution.

CNC Lee
Fusion 360 CAM Post Processor Expert
https://linktr.ee/cnclee
Message 7 of 7
conny_olsson
in reply to: CNC_Lee

Thanks for the reply

I will let you know if we have any problems with the post processor.

We will have training next week at Fusion 360 CAM

Yours sincerely,

Conny

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report