Announcements
Attention for Customers without Multi-Factor Authentication or Single Sign-On - OTP Verification rolls out April 2025. Read all about it here.

Post for Okuma LB3000EXii-MYW

nickGX2SM
Explorer

Post for Okuma LB3000EXii-MYW

nickGX2SM
Explorer
Explorer

Hi, 

 

There are a couple threads I've seen that reference this machine and the authors search for a suitable post for Fusion 360 CAM, but nothing that I can find that results in an actual file / attachment available. 

 

We are wanting to integrate Fusion CAM workflow with this machine which includes mill/turn & Y axis. 

 

Does a post exist or will we have to look at creating one? 

 

Thanks for any info / help in advance. 

 

Nick

0 Likes
Reply
505 Views
4 Replies
Replies (4)

Laurens-3DTechDraw
Mentor
Mentor

Some re-sellers might have something close for that machine.

Laurens Wijnschenk
3DTechDraw

AutoDesk CAM user & Post editor.
René for Legend.


0 Likes

nickGX2SM
Explorer
Explorer

Hi Laurens, 

 

Do you mean local Fusion360 resellers? Or HSMWorks resellers? 

 

Nick

0 Likes

Laurens-3DTechDraw
Mentor
Mentor

Any Autodesk CAM re-seller.

But since this is a little more tricky the (old)HSMWorks re-sellers might have a little more experience.

Laurens Wijnschenk
3DTechDraw

AutoDesk CAM user & Post editor.
René for Legend.


0 Likes

jeff.walters
Advisor
Advisor

We have brought the Autodesk CAM forum (mainly HSMWorks and Inventor HSM users) over. It’s called INVENTOR HSM & HSMWORKS CAM. In that area there is a post section and if you ask over there you might find someone with a post or who can help you get one written. Since they all use the same post processors a post from any of the systems will work in Fusion.

 

http://forums.autodesk.com/t5/post-processors/bd-p/218

Jeff Walters
Senior Support Engineer, CAM
0 Likes