Community
Fusion Manufacture
Talk shop with the Fusion (formerly Fusion 360) Manufacture Community. Share tool strategies, tips, get advice and solve problems together with the best minds in the industry.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Post for Mitsubishi Meldas 520AM

4 REPLIES 4
Reply
Message 1 of 5
P_Tram
159 Views, 4 Replies

Post for Mitsubishi Meldas 520AM

Hi,

 

Does anyone have a working post for a Mitsubishi Meldas 520am?

The machine is a Hartford HV-35 Mill

 

Thanks, Paul

4 REPLIES 4
Message 2 of 5
seth.madore
in reply to: P_Tram

Likely not for that exact control. You're going to need to use the Mitsubishi post and edit it to suit your machine/needs. It likely shouldn't be too far off the mark as it sits now.


Seth Madore
Customer Advocacy Manager - Manufacturing
Message 3 of 5
CNC_Lee
in reply to: P_Tram

 @P_Tram 

You will need to get a custom post processor written if the generic posts are not providing the required output for your machine. I offer post processor development services and happy to work out a solution for your machine! Message me if still needing assistance. 

If my post answers your question, please use Accept as Solution.

CNC Lee
Fusion 360 CAM Post Processor Expert
https://linktr.ee/cnclee
Message 4 of 5
P_Tram
in reply to: P_Tram

Thanks gents,

 

I may hit you up for that thanks Lee.
We have a Daewoo Puma 8S with Fanuc OT controller and the generic fanuc post from fusion does not play, I have to delete lines of code to make it work and its a pain in the ass. Do you have experience with this?

 

Thanks, Paul.

Message 5 of 5
CNC_Lee
in reply to: P_Tram

@P_Tram 

I do!


If my post answers your question, please use Accept as Solution.

CNC Lee
Fusion 360 CAM Post Processor Expert
https://linktr.ee/cnclee

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report