Announcements
Attention for Customers without Multi-Factor Authentication or Single Sign-On - OTP Verification rolls out April 2025. Read all about it here.

OMG - Selecting a Post Processor on Mac Fusion 3 is like grabbing a greased pig!

Anonymous

OMG - Selecting a Post Processor on Mac Fusion 3 is like grabbing a greased pig!

Anonymous
Not applicable

Screenshot doesn't show the hilarity of trying to actually select a Post Processor! Tried both the Apple Magic Mouse and the Logitech MX mouse and they both exhibit crazy rapid scrolling when trying to choose a post processor.  

 

PLEASE FIX!

 

Post Processor Selection.jpg

0 Likes
Reply
419 Views
5 Replies
Replies (5)

HughesTooling
Consultant
Consultant

It's been reported a couple of times, hopefully today's update will have a fix.

 

Mark

Mark Hughes
Owner, Hughes Tooling
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.

EESignature


0 Likes

jeff.pek
Community Manager
Community Manager

Yes, though the update has been pushed back a bit -- hopefully only until tomorrow.

  Jeff

0 Likes

rklopp
Advocate
Advocate

The workaround is to find the pre-packaged post you want and put a copy in your personal posts folder. The trick is to find out where the pre-packaged posts are hidden. There is a forum post explaining it. The pre-packaged posts on my Mac are in /Users/MyName/Library/Application Support/Autodesk/webdeploy/production/version_hash/Libraries/Applications/CAM360/Data/Posts. The folder version_hash has an unintelligible name, and not all of the version_hash folders have Post folders within, but I was able to find what I needed based on modification dates. 

0 Likes

Steinwerks
Mentor
Mentor

One can also just download any of the generic posts from here: http://cam.autodesk.com/posts/

 

Keep in mind there are more posts in the online library than are supplied in Fusion so check there first if one isn't found in the installed generic posts library as well.

Neal Stein

New to Fusion 360 CAM? Click here for an introduction to 2D Milling, here for 2D Turning.

Find me on:
Instagram and YouTube
0 Likes

adsloud
Alumni
Alumni

We've released a new update which contains this fix today, please check again.


Debbie Lou
Sr. QA Engineer for HSM CAM
0 Likes