Community
Fusion Manufacture
Talk shop with the Fusion (formerly Fusion 360) Manufacture Community. Share tool strategies, tips, get advice and solve problems together with the best minds in the industry.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

OD Grooving tool geometry issue!!

1 REPLY 1
Reply
Message 1 of 2
Schillertb
129 Views, 1 Reply

OD Grooving tool geometry issue!!

I noticed an issue that's somewhat confusing when setting up an OD grooving tool. When inputting the 'width' and the 'Groove width', the graphics seem a bit backwards. ive attached some pictures to clarify what i mean. the 'width' should refer to the smaller relief area and the 'groove width' should be the cutting edge. 

Groove Width.PNG

Width.PNG

or am i missing something?

 

thanks

 

1 REPLY 1
Message 2 of 2
seth.madore
in reply to: Schillertb

Yep, you're absolutely right! Good news; we've fixed this and you should see it properly in the next major release 🙂


Seth Madore
Customer Advocacy Manager - Manufacturing

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report