Ah, I see! Sorry, I've gotten used to people referring to Operations as the individual toolpaths. They tend to do that on the other side of the pond..
So yeah, press CTRL and select all the Setups, post process. You can also CTRL select all the setups, right click and select "Create NC Program". Post out that NC Program (after reviewing the order of tools and whatnot) and good to go.
Now, you will notice that it performs a G28 (or 53) move between offsets. That's by design (for safety). A lot of the new posts have logic in them to bypass this if you want, something along the lines of "Safe Position Method"
Seth Madore
Customer Advocacy Manager - Manufacturing