Community
Fusion Manufacture
Talk shop with the Fusion (formerly Fusion 360) Manufacture Community. Share tool strategies, tips, get advice and solve problems together with the best minds in the industry.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Machining a curved bottom surface

4 REPLIES 4
SOLVED
Reply
Message 1 of 5
bmcihk
768 Views, 4 Replies

Machining a curved bottom surface

Hi,

 

I'm trying to machine a curved face at the bottom of a pocket and i just cant get the 3D Pocket opperation to take the last sliver of the side of the pocket. I have been trying all options now and cant seem to get it to work. 

I need to machine a lot of these pieces so leaving a sliver like this is not an option, any help out there?

 

 

Labels (1)
  • CAM
4 REPLIES 4
Message 2 of 5
seth.madore
in reply to: bmcihk

Can you share your Fusion file?
File > Export > Save to local folder, return to thread and attach the .f3d file in your reply


Seth Madore
Customer Advocacy Manager - Manufacturing
Message 3 of 5
bmcihk
in reply to: seth.madore

Thanks for the reply so far, here is the file.

Message 4 of 5
seth.madore
in reply to: bmcihk

So, Parallel does a great job of calculating for the tip of the tool, but it tends to be annoying for a wall of a part, on either one side of a toolpath or the other. The easiest way to demonstrate this (which leads to our solution) is to change the angle of your toolpath from 90 degrees to 270. 
Duplicate the toolpath so all selections and settings are preserved and just set it to 270 degrees.
Result:

2021-02-15_14h26_10.png


Seth Madore
Customer Advocacy Manager - Manufacturing
Message 5 of 5
bmcihk
in reply to: seth.madore

Thank you that works, seems like a strange way to do it.

Is this some kind of bug the developers are working on if not should it not be reported as such?

 

Thanks for the fast support!

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report