Community
Fusion Manufacture
Talk shop with the Fusion (formerly Fusion 360) Manufacture Community. Share tool strategies, tips, get advice and solve problems together with the best minds in the industry.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Lead-in/out distance shortens chamfer contour

3 REPLIES 3
Reply
Message 1 of 4
david.lucas_comega
134 Views, 3 Replies

Lead-in/out distance shortens chamfer contour

I want to extend the distance of the lead-out of a chamfer contour, but the contour selected gets shortened by the amount added to the lead-out distance parameter.

 

I've managed to solve this by using the End Extension Length in the Geometry tab.

 

Is this an intended behaviour?

 

I've added an example.

 

00_0mm_leadout.png

01_10mm_leadout.png

02_20mm_leadout.png

03_added_end_extension_length.png

3 REPLIES 3
Message 2 of 4

@seth.madore I derived a 2D contour to machine the same chamfer and it did not present this strange behavior.  Perhaps this is a bug in 2D Chamfer?

bradfrancola_0-1690142924686.png

 

Message 3 of 4

Sorry for the delay, I've logged this as CAM-47029


Seth Madore
Customer Advocacy Manager - Manufacturing
Message 4 of 4

Thank you. It's just a little inconvenient, but fortunately it can be solved by other means.

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report