Community
Fusion Manufacture
Talk shop with the Fusion (formerly Fusion 360) Manufacture Community. Share tool strategies, tips, get advice and solve problems together with the best minds in the industry.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Inspection Report In Okuma

1 REPLY 1
Reply
Message 1 of 2
NickErmis
126 Views, 1 Reply

Inspection Report In Okuma

We are using on machine inspection on our Haas VMC's and are able to import the results into Fusion and get a nice inspection report.  Is there a process to do the same thing in an Okuma?  We have the probing cycle in our post processor as well as probing capabilities in the machine, we post to probe features and comp wear on tight tolerance bores, just would like to retrieve the information the same way through Fusion.

 

Thanks

1 REPLY 1
Message 2 of 2
TrollTuner2
in reply to: NickErmis

There was a beta Okuma inspection post released a while back.     I can get it to record the Ren-results file and a results.min.  But it wont import those into Fusion Says wrong type or incomplete but it sure looks correct.  

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report