Community
Fusion Manufacture
Talk shop with the Fusion (formerly Fusion 360) Manufacture Community. Share tool strategies, tips, get advice and solve problems together with the best minds in the industry.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Hollow milling/external spline tool

2 REPLIES 2
Reply
Message 1 of 3
LorroPrecision
108 Views, 2 Replies

Hollow milling/external spline tool

I have a part that I need to create an external spline, using a rotary broach tool. The tool I'm using looks a little like this

 

download.jpg

 

I'm making it by machining a cylindrical spigot before coming down on it with the broach tool, using a reaming cycle.

 

My question is, is there a way to get fusion to display stock as though it was cut with an external tool like this?

 

At the moment, it just cuts a hole into the stock. I've tried creating a form tool but it won't allow for a recess like a hollow mill has.

 

It's just for visual purposes but it would be nice to see in fusion roughly what I see IRL.

 

Thanks

2 REPLIES 2
Message 2 of 3

No, this is not possible in Fusion, sorry.


Seth Madore
Customer Advocacy Manager - Manufacturing
Message 3 of 3

OK, thanks

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report