Help for helical milling on profile

[stefano.oteri]

Hello, I wanted to know if there was a possibility to do the roughing helical milling, as shown in the attached image, on the two cylinders in a single pass instead of doing one cylinder first and then the other. Thank you, regards.

[BrandonTBFBF]

You could draw a sketch and use 2D Adaptive to rough it all out or use 2D contour with Ramp selected in the linking tab.

[seth.madore]

Would you be able to share your Fusion file here?
File > Export > Save to local folder, return to thread and attach the .f3d/.f3z file in your reply.

[programming2C78B]

you could do a 2D contour ramp with the bottom profile selected.