Talk shop with the Fusion (formerly Fusion 360) Manufacture Community. Share tool strategies, tips, get advice and solve problems together with the best minds in the industry.
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
I need some help creating a boring bar. It is a Sandvik MB-07T020-02-10R 1025 insert on a MB-E0500-25-07R bar. Not sure of the best way to add this to the library and input the correct dimensions and shape to make it as close as possible.
I need some help creating a boring bar. It is a Sandvik MB-07T020-02-10R 1025 insert on a MB-E0500-25-07R bar. Not sure of the best way to add this to the library and input the correct dimensions and shape to make it as close as possible.
Use custom insert definition. Only things that really matter to produce valid code are tip radius, front and back clearance angle, cutting edge relief angle and insert proportion to holder diameter.
Use custom insert definition. Only things that really matter to produce valid code are tip radius, front and back clearance angle, cutting edge relief angle and insert proportion to holder diameter.
I appreciate the feedback. So would that be setting "Shape" to custom? Or using a triangular shape for example and filling in the dimensions? Attached images with the insert shape and info... I have started trying to do custom shape insert.. however unsure if that is what is needed and if so I am still unsure of what to put under "trailing edge length", and "Angle".
I appreciate the feedback. So would that be setting "Shape" to custom? Or using a triangular shape for example and filling in the dimensions? Attached images with the insert shape and info... I have started trying to do custom shape insert.. however unsure if that is what is needed and if so I am still unsure of what to put under "trailing edge length", and "Angle".
Fusion
