Announcements
Attention for Customers without Multi-Factor Authentication or Single Sign-On - OTP Verification rolls out April 2025. Read all about it here.

Helix Entry for pocket clearing

miengineer313
Participant

Helix Entry for pocket clearing

miengineer313
Participant
Participant

Hello! I am having trouble with a pocket toolpath where the helix entry ends before it actually spirals into the part. The toolpath looks good to go, I just need to know how to change the helix depth. I am attaching a picture for more clarity. 

0 Likes
Reply
211 Views
5 Replies
Replies (5)

seth.madore
Community Manager
Community Manager

Would you be able to share your Fusion file here?
File > Export > Save to local folder, return to thread and attach the .f3d/.f3z file in your reply.


Seth Madore
Customer Advocacy Manager - Manufacturing
0 Likes

miengineer313
Participant
Participant

Attached is the fusion file. 

0 Likes

seth.madore
Community Manager
Community Manager

What is your desired result; helix down to final depth, retract back up and then take the slot in .05" increments? Or did you want to just helix to each depth instead of the ramp that it's doing?


Seth Madore
Customer Advocacy Manager - Manufacturing
0 Likes

miengineer313
Participant
Participant

What were trying to accomplish is to have the tool helix into the stock about .04 or so before it starts making its passes back and fourth in the x-axis. About .03-.04 per stepdown. 

0 Likes

seth.madore
Community Manager
Community Manager

You're going to have to make a concession in some area though; it's either a large stepover and ramp pass to each depth, or a helix (as desired) but a first pass thru the middle of the slot and a finish pass:

2024-01-30_14h23_20.png


Seth Madore
Customer Advocacy Manager - Manufacturing
0 Likes