Heidenhain tnc 426 post processor issues

[winrace.oat]

I have a minor issue with the heidenhain tnc 426 post processor in fusion 360.

When having a tool change it enters a M126 code instead of M6 who I should be.

Example:
Instead of.
Tool call 1 z s500
L z+0 f max m92
M126
M3
It should say:
Tool call 1 z s500
L z+0 f max m92
M6
M3

Also I get error message on the machine on every cycle call like every drilling, tapping etc cycles this happens so I have to put it in manually on the machine

Otherwise everything works

[LibertyMachine]

What is the error you get for the drilling cycles, and what do you have to put in to make it work?

[winrace.oat]

Added pictures of the heidenhain constoll showing the error message.

for riggid tapping i put for example this into the machine:

CYCL DEF 17.0 TAPPING
CYCL DEF 17.1 SET UP +11
CYCL DEF 17.2 DEPTH -20
CYCL DEF 17.3 PITCH +1

For pecking i put in for example:

CYCL DEF 1.0 PECKING
CYCL DEF 1.1 SET UP +11
CYCL DEF 1.2 DEPTH -28.502
CYCL DEF 1.3 PECKG +1.25
CYCL DEF 1.4 DWELL 0
CYCL DEF 1.5 F589

but i found an another heidenhain post prosessor where this works only that I still need M6 code together with Tool Call And for rappid movement it puts out an feedrate of 4000mm/m instead of FMAX

[winrace.oat]

This is the one I need to have the M6 code straight after TOOL CALL

[Anonymous]

Has anyone got this processor working so it uses M6 after tool change command?