Announcements
Attention for Customers without Multi-Factor Authentication or Single Sign-On - OTP Verification rolls out April 2025. Read all about it here.

have trouble with chamfer command in cam :(

johnptc314159
Collaborator

have trouble with chamfer command in cam :(

johnptc314159
Collaborator
Collaborator

i would like to chamfer the hole after facing the top off that was used to hold the part in the mill to work on the other side.  help :)_

 

model https://a360.co/3LHWnva 

0 Likes
Reply
Accepted solutions (2)
217 Views
3 Replies
Replies (3)

seth.madore
Community Manager
Community Manager
Accepted solution

As you have it modeled, this is not possible. It's not an entirely proper workflow to create a model that reflects what you're going to (in theory) end up with at the conclusion of OP1. Rather, model the part as it should be when completely machined and then define stock accordingly.

 

Now, there are some cases where one would desire to create a model to represent what stock should be in subsequent operations, and that is something I do fairly often.


Seth Madore
Customer Advocacy Manager - Manufacturing
1 Like

seth.madore
Community Manager
Community Manager
Accepted solution

I've modified your file to represent what I think you're looking for, as well as demonstrate what I'm going on about. Give it a look and let me know if you have any questions!

 

 


Seth Madore
Customer Advocacy Manager - Manufacturing
2 Likes

johnptc314159
Collaborator
Collaborator

thanks :slightly_smiling_face:

 

it wasnt modeled that way........ that was what was left from the operation on the flip side :slightly_smiling_face:

got it :slightly_smiling_face:

best

john

0 Likes