HAAS SL10 Post/Haas Turning

[tektongamecalls]

Spoke with Tom from Fusion Support Friday after going to post some new designs for turning and fusion continues to crash or fail at writing the program. At first it was a design issue to be able to use the general Haas turning to post. I added a milling capability and it posted. Sat today to put everything on a USB for Monday and haven't been able to post. Corrected designs or posting with turning/milling capabilities. 

Any thoughts? Thanks in advance

[seth.madore]

---

@tektongamecalls wrote:

...I added a milling capability and it posted. Sat today to put everything on a USB for Monday and haven't been able to post. Corrected designs or posting with turning/milling capabilities. 

Any thoughts? Thanks in advance

---

Are you using a 2 axis lathe or a turn/mill?

What exact post were you starting with and what errors were/are you seeing?

[tektongamecalls]

One of the designs I was posting had a drilling/boring function that was off center. New designs don’t and I’m still crashing when I try to post. My friend who had the SL10 before me can post but I can’t. Even after choosing the machine and post properly. The software just crashes.

[seth.madore]

Would you be able to share your Fusion file here?
File > Export > Save to local folder, return to thread and attach the .f3d/.f3z file in your reply.

Please share the post processor that you are trying to use, I'm not seeing an SL10 post processor.

Adding "milling" capabilities is not the route I would have gone, this could likely contribute to some issues...