Announcements
Attention for Customers without Multi-Factor Authentication or Single Sign-On - OTP Verification rolls out April 2025. Read all about it here.

Haas NGC Post G95

moore.michaelw
Explorer

Haas NGC Post G95

moore.michaelw
Explorer
Explorer

I recently got a new to me Haas VF2 with NGC, for years I have been using Fadal mills with both Fadal and Fanuc controls, and the posts have always had a radio button to click to enable G95 (IPR) feedrates. The NGC post does not have this. Can someone modify the post, or explain to me the steps needed to take, to add G95 as an option not just for tapping but for everything.

 

Thanks in advance for any help.

0 Likes
Reply
Accepted solutions (2)
634 Views
12 Replies
Replies (12)

Don.Cyr
Collaborator
Collaborator

You have to look in the post properties under preferences and check the box.

 

DonCyr_0-1710852356230.png

 

Please click "Accept Solution" if I helped with your question or issue.
0 Likes

moore.michaelw
Explorer
Explorer

That's for tapping only. I want G95 for everything.

0 Likes

programming2C78B
Advisor
Advisor

then you are looking for G99 to set your feedrate.

Please click "Accept Solution" if what I wrote solved your issue!
0 Likes

moore.michaelw
Explorer
Explorer
G99 is for returning to R plane in a canned cycle.
G94 is IPM
G95 is IPR
I just want to know how to get a check box to turn on IPR for all tools,
not just tapping.
0 Likes

programming2C78B
Advisor
Advisor

You need to be more precise then with "everything". You mean all canned cycles. FYI you can still program as IPR inside fusion and allow it to post out in IPM.

https://www.haascnc.com/service/codes-settings.type=gcode.machine=lathe.value=G99.html

Please click "Accept Solution" if what I wrote solved your issue!
0 Likes

moore.michaelw
Explorer
Explorer
I do not want any federate, anywhere in my program to post as IPM.
0 Likes

moore.michaelw
Explorer
Explorer

For example, if you look at the Fanuc post, you will see in the preferences tab the seventh option down is simply titled "Use G95"

Can this please be added to the NGC post?

0 Likes

Don.Cyr
Collaborator
Collaborator
Accepted solution

Check the box on the tool tab. If you have the latest NGC post it will output the correct code.

DonCyr_0-1710876724584.pngDonCyr_1-1710876770187.png

 

Please click "Accept Solution" if I helped with your question or issue.
0 Likes

Don.Cyr
Collaborator
Collaborator
Accepted solution

Look for this section in the post, if your not using the latest or you have a modified post.

DonCyr_2-1710876997813.png

 

Please click "Accept Solution" if I helped with your question or issue.
0 Likes

moore.michaelw
Explorer
Explorer

There is only one issue with this and that is that this option is available in drilling but not in milling. 

I want to be able to post my entire program in IPR.

 

0 Likes

programming2C78B
Advisor
Advisor

As I said before

"then you are looking for G99 to set your feedrate."

Please click "Accept Solution" if what I wrote solved your issue!
0 Likes

moore.michaelw
Explorer
Explorer

G99 for feedrate is for lathes.

This is a mill.

0 Likes