Community
Fusion Manufacture
Talk shop with the Fusion (formerly Fusion 360) Manufacture Community. Share tool strategies, tips, get advice and solve problems together with the best minds in the industry.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Filling in cast contours to machine

2 REPLIES 2
SOLVED
Reply
Message 1 of 3
pcgrif13
190 Views, 2 Replies

Filling in cast contours to machine

I'm currently trying to fill in these cast ribs up to the nearest surface. However, I'm struggling to figure out how exactly how to do it. Any help out there would be greatly appreciated.

Screenshot 2023-07-25 114132.png

2 REPLIES 2
Message 2 of 3
HughesTooling
in reply to: pcgrif13

You need to figure out the order you need to remove the fillets, then delete the cavities. Then add back any fillets you needed to remove but are still needed. See attached file. Step along the timeline to figure out what I did.

Does this look OK?

HughesTooling_0-1690301450271.png

 

Mark Hughes
Owner, Hughes Tooling
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.

EESignature


Message 3 of 3
HughesTooling
in reply to: pcgrif13

Here's another way using sketches and extrusions.

HughesTooling_0-1690302107945.png

 

Mark Hughes
Owner, Hughes Tooling
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.

EESignature


Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report