Announcements
Attention for Customers without Multi-Factor Authentication or Single Sign-On - OTP Verification rolls out April 2025. Read all about it here.

Feed optimization: "Only Inner Corners" still not working

FrodoLoggins
Advisor

Feed optimization: "Only Inner Corners" still not working

FrodoLoggins
Advisor
Advisor

Screenshot 2023-11-10 at 10.27.11 AM.png

- Time Magazine’s Person of the Year 2006
- Apple M1 Max rMBP A2485 // Latest MacOS // Latest Fusion
- Usually working off files uploaded to Fusion as: Step, STL, SLDPRT. If it matters ask me.
1 Like
Reply
Accepted solutions (1)
296 Views
8 Replies
Replies (8)

oleg.tikhomirov
Autodesk
Autodesk
Accepted solution

Hi @FrodoLoggins,

 

Thanks for feedback. It's a known issue CAM-42746.



Oleg Tikhomirov
Software Engineer
0 Likes

FrodoLoggins
Advisor
Advisor

Hi thanks. Any idea if this will be worked on at some point soon? It was a known issue 5 years ago when I first reported it.

- Time Magazine’s Person of the Year 2006
- Apple M1 Max rMBP A2485 // Latest MacOS // Latest Fusion
- Usually working off files uploaded to Fusion as: Step, STL, SLDPRT. If it matters ask me.
1 Like

oleg.tikhomirov
Autodesk
Autodesk

We're looking at it now. I can't give any promisses until it's finished and tested. I'll give update later.



Oleg Tikhomirov
Software Engineer
0 Likes

Robert_J_Scott
Enthusiast
Enthusiast

Is there any scope to add a percentage and not an absolute feedrate? If you have different sized internal and external rads all around your single profile you wouldn't want 1 single feedrate for all of them, it makes no sense. 

Mastercam has the ability to distribute a feedrate depending on the difference in size of the radius to cut. It's very clever.

0 Likes

FrodoLoggins
Advisor
Advisor

Any updates?

- Time Magazine’s Person of the Year 2006
- Apple M1 Max rMBP A2485 // Latest MacOS // Latest Fusion
- Usually working off files uploaded to Fusion as: Step, STL, SLDPRT. If it matters ask me.
0 Likes

oleg.tikhomirov
Autodesk
Autodesk

Hi @FrodoLoggins,

 

The "Only Internal Corners" issue should be fixed. I get the following result for original example:

olegtikhomirov_0-1731572480265.png

 

 



Oleg Tikhomirov
Software Engineer
0 Likes

oleg.tikhomirov
Autodesk
Autodesk

Hi @Robert_J_Scott,

Thanks for feedback. We have very similar improvment request CAM-38159.



Oleg Tikhomirov
Software Engineer
0 Likes

Robert_J_Scott
Enthusiast
Enthusiast

Thanks.

 

At the moment, I get an alarm if I try to increase the feed for an outer radius. Removal of the alarm would be a start but definitely the ability to dynamically change feedrates for inside and outside rads dependant on size in relation to initial programmed (straight line) feedrate would be game changing!

1 Like