Community
Fusion Manufacture
Talk shop with the Fusion (formerly Fusion 360) Manufacture Community. Share tool strategies, tips, get advice and solve problems together with the best minds in the industry.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Fanuc 21iT Post Problem

2 REPLIES 2
Reply
Message 1 of 3
lethal375
117 Views, 2 Replies

Fanuc 21iT Post Problem

When using G71 Canned cycle the post is always wrong?

First lines after G71 contain a rapid Z move that causes an alarm.

Second line U is a negative?

 

This is a boring operation

 

(PROFILE ROUGHING2)
N15 T0808
N16 G90 G95 G18
N17 M8
N18 G97 S2000 M3
N19 G0 X0.342 Z0.1969
N20 G92 S2000
N21 G96 S656 M3
N22 G0 Z0.005
N23 X0.365
N24 G71 U0.01 R0.04
N25 G71 P26 Q31 U-0.008 W0.004 F0.006
N26 G0 X0.651 Z0.005
N27 G1 Z0.
N28 X0.5177 Z-0.0521
N29 G2 X0.47 Z-0.1009 I0.0382 K-0.0489
N30 G1 Z-0.9356
N31 X0.375
N32 G0 X0.342 Z0.005
N33 Z0.1969
N34 G80
 

 

2 REPLIES 2
Message 2 of 3
seth.madore
in reply to: lethal375

Which post processor is this?


Seth Madore
Customer Advocacy Manager - Manufacturing
Message 3 of 3
lethal375
in reply to: lethal375

Fanuc Turning

Only see one Post Processor 

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report