Announcements
Attention for Customers without Multi-Factor Authentication or Single Sign-On - OTP Verification rolls out April 2025. Read all about it here.

Fagor 8055m 5-axis drilling

firebloodphoenixHRBBH
Contributor

Fagor 8055m 5-axis drilling

firebloodphoenixHRBBH
Contributor
Contributor

Hello, I'm trying to write a Fagor 8055m’s 5-axis post-processor, but I cannot seem to get the 5-axis drilling function to work properly. It is supposed to output Y as a zero, iow. position B,C then drill. I'm using the DMS Faggor 8055 with several modifications.

The Markino slim3n on the post-processor library seems to be the closest to be correct but using A&C instead. But I have no idea how the output set X to zero.

This is my first post-processor so any help would be appreciated, also if you see a glaring issue I this post let me know.

0 Likes
Reply
279 Views
2 Replies
Replies (2)

zwelsh91
Advocate
Advocate

Have you tried either of the HSM Post Library posts that are available?

 

They are located here: https://cam.autodesk.com/hsmposts

Search for DMS and there is a post for the 8055 and 8065

Zak Welsh
Zakary Welsh Machine LLC
0 Likes

firebloodphoenixHRBBH
Contributor
Contributor

As I said, I am using the DMS. but I think I solved that issue. I set optimizeMachineAngles2(1). but now i have issues getting the head rotating to the position i want.

0 Likes