Fadal post help (G28 G91 Z0.)

[liam]

When posting out using multiple offsets this line (G28 G91 Z0.) is added at the end of each operation before it continues to the next offset. I end up going through each file before I run it to comment out each of these instances except for the ones at the beginning and the end. Is it possible to get a modified post that does not do this for each operation in a new offset? I could understand if this is for safety but all of my safe movements are already factored into the retract/clearance heights of each operation. I am attaching a sample file with the G28 movements commented out. Thanks.

[SpecialJ]

If you can handle waiting a few days i can give you a fadal post that should work pretty well. I made this years ago for HSM but I'm pretty sure it works fine in fusion (same thing). 

[seth.madore]

@liam  this is a common request, and you are correct in presuming that it's out of the sake of safety that the behavior is as it is. Fun fact: the newest Haas NGC post has language in it for "Safe Z between WCS changes". So, they aren't entirely opposed to this change. Too bad Haas gets all the love..

Are you using the stock post or one of your own modifications?