Announcements
Attention for Customers without Multi-Factor Authentication or Single Sign-On - OTP Verification rolls out April 2025. Read all about it here.

Custom thread profile

thekondrat
Enthusiast

Custom thread profile

thekondrat
Enthusiast
Enthusiast

Can I get such a thread profile in fusion?

This video shows the gcode that I want to achieve. https://www.youtube.com/watch?v=E8nC8z5bK50

My iiner thread have ID 77mm and pitch 10.5mm Thread depth 2.3mm

I want to get a similar thread using the SVUCR tool.SVUCR.gif

thread P10.5.png

 

0 Likes
Reply
Accepted solutions (1)
390 Views
1 Reply
Reply (1)

HughesTooling
Consultant
Consultant
Accepted solution

No Fusion can not do this and not sure there's a workaround. SprutCAM can do this as well, bit less of an outlay than MasterCAM and it does this fully automated not like the bodge in the video. You might be able to do something similar to the video just to get a set of points then manually program a set of single point thread passes (G33).

This is the SprutCAM dialog, you just select Shape and the profile sketch and that's it.

image.png

And here's the part, machined with a VBMT tool.

image.png

Mark

Mark Hughes
Owner, Hughes Tooling
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.

EESignature


1 Like