Community
Fusion Manufacture
Talk shop with the Fusion (formerly Fusion 360) Manufacture Community. Share tool strategies, tips, get advice and solve problems together with the best minds in the industry.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Creating a dimensional drawing from a manufacturing model

7 REPLIES 7
SOLVED
Reply
Message 1 of 8
Anonymous
2070 Views, 7 Replies

Creating a dimensional drawing from a manufacturing model

Hi, 

Relative beginner here so apologize ahead of time, I did my best to search for this answer to no avail. I created a mouse maze for a gift and constructed it in fusion out of .4 inch plywood because that's what I have. I used the Nesting feature to create an arrangement on the size of plywood I have so I would know how to best cut the wood. Only problem is I would really like to create a dimensional drawing as a guide for sketching it out on the wood. The only option is to create dimension drawings from the design tab. Any ideas? The layout is totally different of my manufacturing model so creating a design printout wouldn't be helpful. 

 

Tags (3)
Labels (1)
7 REPLIES 7
Message 2 of 8
Anonymous
in reply to: Anonymous

It would also be nice to potentially print it out at actual size and glue it to the piece of wood itself. Then take a jig saw and go to town.

Message 3 of 8
seth.madore
in reply to: Anonymous

I'm not sure that's going to be possible. But, could you share your file here and I'll poke at it a bit? 

File > Export > Save to local folder. Return to thread and attach the .f3d/.f3z file in your reply. If you would prefer not to share it publicly, you can email me at: seth dot madore at autodesk dot com


Seth Madore
Customer Advocacy Manager - Manufacturing
Message 4 of 8
shengrui.xiao
in reply to: Anonymous

Hi @Anonymous , You can enable the Arrange feature to the Modify menu in the Design workspace, and create an arrange in your design so that you can create a dimension drawings from the design. Hope can help you.

Snipaste_2020-12-22_19-32-40.png

Message 5 of 8
Anonymous
in reply to: shengrui.xiao

Thank you very much this worked perfectly!

Message 6 of 8
Anonymous
in reply to: seth.madore

Thank you very much for the offer, the arrange feature in the design panel is exactly what I needed. I appreciate your willingness to help!

Message 7 of 8
rturnier
in reply to: Anonymous

Werre u able to print the 2D drawings of ur cut sheets ?  Thx

Message 8 of 8
Anonymous
in reply to: rturnier

Hi, yes although I didn’t get it printed full size. I just referenced it and plotted the relative distances on the plywood so it all fit economically on one sheet of wood.

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report