Coolant Through tool

[Carbidecnc]

Hi is there anybody who can help me with this I get an error when selecting coolant through tool, don't think it is supported in the PP Siemens 828D attached here  M codes are M12 on M13 off

Kind Regards

[seth.madore]

The 828 is setup for M88/M89, what is the error you're getting, and is it when posting code or running it at the machine?

[Carbidecnc]

I get error when trying to post ,my M codes are M12 on M13 off

[seth.madore]

Hmm. It's got nothing to do with the coolant selection, there seems to be some other bug going on, as even the library version of this isn't working.

I've shared this thread in our internal chat channels, hopefully we can get a post developer to take a look at the issue 🤔

[seth.madore]

The error was in the Drilling logic, it wasn't coolant related. Give this post a try and let me know if you have any issues

[Carbidecnc]

Hi Seth

Thank you for your help still no luck though Ive taken a screen shot of the error message 

Regards

[Anonymous]

Excuse me.

From this error message, it seems that the problem is not in the postprocessor.

Would it be a good idea to take a look at the machine configuration and see if the machine supports the specified coolant?

[seth.madore]

This error occurs even without a machine configuration. The updated post addresses the issue 🙂

[Anonymous]

Sorry to interfere with the topic.
I was ignorant.

[seth.madore]

oops, that post I shared doesn't have the "spindle through" code bits

[seth.madore]

 {id:COOLANT_THROUGH_TOOL, on: 12, off: 13},

[Carbidecnc]

Thanx Seth I did change to that in the post before and didnt work but I went back and tried again must of forgot to put in a comma or something but all good now thank you IT WORKS