Community
Fusion Manufacture
Talk shop with the Fusion (formerly Fusion 360) Manufacture Community. Share tool strategies, tips, get advice and solve problems together with the best minds in the industry.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

C-tek km80 post processor for Fusion 360

2 REPLIES 2
Reply
Message 1 of 3
djheilbron
164 Views, 2 Replies

C-tek km80 post processor for Fusion 360

Hi there, does anyone by any chance have a post processor for a C-TEK KM80 D. 

 

Thank you so much.

2 REPLIES 2
Message 2 of 3
Arun.rs
in reply to: djheilbron

HI @djheilbron 

 

What is the controller fitted on this machine? Seems this is 3 axis machine. You can look into Fusion 360 post library https://cam.autodesk.com/hsmposts

 

Regards

 



Arun.RS
Technical Consultant - Post Processor
Message 3 of 3
CNC_Lee
in reply to: djheilbron

@djheilbron 

You will need a custom post written for this machine as there is not a generic post for this cointroller in the current Fusion post library. There are professionals who can develop the post and confifgure it to suit your needs! 

 

CNC_Lee_0-1689637777333.png

 

 

If my post answers your question, please use Accept as Solution.

CNC Lee
Fusion 360 CAM Post Processor Expert
https://linktr.ee/cnclee

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report