Community
Fusion Manufacture
Talk shop with the Fusion (formerly Fusion 360) Manufacture Community. Share tool strategies, tips, get advice and solve problems together with the best minds in the industry.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Bore: No warning given that horizontal/vertical lead in/out rads are too large

3 REPLIES 3
SOLVED
Reply
Message 1 of 4
FrodoLoggins
67 Views, 3 Replies

Bore: No warning given that horizontal/vertical lead in/out rads are too large

The tool is Ø.156" and the bore is Ø.159" so no way a .1" lead in radius will fit. But no warning:

1.png2.png3.png4.png

 

- Time Magazine’s Person of the Year 2006
- Apple M1 Max rMBP A2485 // Latest MacOS // Latest Fusion
- Usually working off files uploaded to Fusion as: Step, STL, SLDPRT. If it matters ask me.
3 REPLIES 3
Message 2 of 4
seth.madore
in reply to: FrodoLoggins

The Bore, Circular and Thread toolpaths have always adjusted the lead-in/out parameters to the maximum possible and no warning as to such. You actually want one more warning in your Browser? 🤔


Seth Madore
Customer Advocacy Manager - Manufacturing
Message 3 of 4
FrodoLoggins
in reply to: seth.madore

No I wouldn't. Just figure someone at Autodesk might.

- Time Magazine’s Person of the Year 2006
- Apple M1 Max rMBP A2485 // Latest MacOS // Latest Fusion
- Usually working off files uploaded to Fusion as: Step, STL, SLDPRT. If it matters ask me.
Message 4 of 4
seth.madore
in reply to: FrodoLoggins

Oh good lord, no. Shhh, don't give someone an idea....


Seth Madore
Customer Advocacy Manager - Manufacturing

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums