Community
Fusion Manufacture
Talk shop with the Fusion (formerly Fusion 360) Manufacture Community. Share tool strategies, tips, get advice and solve problems together with the best minds in the industry.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Adaptive clearing will not generate toolpath for hole/pocket "empty toolpath"

3 REPLIES 3
SOLVED
Reply
Message 1 of 4
barnamyl
152 Views, 3 Replies

Adaptive clearing will not generate toolpath for hole/pocket "empty toolpath"

I have been following this tutorial. Up until the specific part I linked, everything was just fine. Now I cannot get a toolpath for those holes! (I am a complete beginner so granted I could be doing something wrong.) I followed that video to a T and I don't understand why it wont work. 

barnamyl_4-1686236044097.png

 

barnamyl_0-1686235891725.png 

barnamyl_1-1686235947746.png

barnamyl_2-1686235978083.png

 

 

barnamyl_3-1686236005694.png

barnamyl_5-1686236118395.png

 

 

Labels (3)
3 REPLIES 3
Message 2 of 4
Anonymous
in reply to: barnamyl

can you share the f3d file? 

 

Save > Export > F3D

Message 3 of 4
dwilliamsFM6K4
in reply to: barnamyl

without seeing the file this is most likely due to the size of the cutter + size of the helical diameter for the ramp in

 

that will typically leave me with 'empty toolpath'

Message 4 of 4
seth.madore
in reply to: barnamyl

@barnamyl did the response by @dwilliamsFM6K4 address your issue?


Seth Madore
Customer Advocacy Manager - Manufacturing

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report